+ Q: What is the maximum and minimum depth of AmbiFibre?
A: The minimum level is 3mm and the maximum is 40mm.
+ Q: Should AmbiFibre be used with AmbiDeck?
A: Yes, this is advised. AmbiFibre is designed with proper heat distribution in mind and will work perfectly with AmbiDeck and the lozenges.
+ Q: How long does AmbiFibre need to set and dry?
A: AmbiFibre can be walked on after 90 minutes, tiled on top of after 2 hours, and resilient floor coverings after 3 hours. It will be set after 10 days, and completely dry a little after that.
+ Q: How long do I have to wait to turn the system on after pouring AmbiFibre?
A: You should wait at least 10 days before putting any heat into the system. If it is heated before then, it could cause moisture to escape unevenly resulting in cracks or a delaminated surface.
+ Q: Should a new underfloor heating system be ramped up to optimum temperature?
A: Yes. It is advisable to start at a lower temperature and increase by 0.5 or 1 degree per day. If the system is turned on at a higher temperature straight away, it could shock the compound and cause damage or cracks.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article